Westlink Cleaning Services provides high-pressure cleaning and pressure washing for homes, strata buildings, commercial properties and industrial sites across Sydney. Our insured, police-checked team cleans driveways, paths, car parks, entrances, common areas and other suitable hard exterior surfaces, and uses soft washing where a surface can’t take high pressure.
We’re based in Bankstown and work Sydney-wide. Each job is planned around the property, the access and the cleaning scope, and you get a clear quote before any work begins. The result is a cleaner, better-presented exterior, with the work organised around how your property is actually used.
Â
Exterior areas across Sydney can develop different types of buildup depending on how the property is used, how exposed the surface is and how much shade or moisture it receives. The right cleaning approach depends on both the problem and the condition of the surface underneath it.
Driveways, paths, walls, courtyards and shared outdoor areas can gradually collect dust, soil, airborne residue and everyday grime. Properties with frequent outdoor use or exposed surfaces often need cleaning once this buildup starts to affect appearance or traction.
Shaded and moisture-prone areas can develop algae, mould, moss and other organic buildup. These issues are common on paths, paved areas, walls and other exterior surfaces that stay damp for longer periods. The surface condition is checked first so the cleaning method can be matched to the material.
Driveways, car parks, loading areas and vehicle-access zones can collect tyre marks, road grime and other residue from regular traffic. Durable surfaces may respond well to controlled high-pressure cleaning, while older or worn materials may need a more careful approach.
Commercial entrances, shared walkways and other busy exterior areas can develop a visible film from foot traffic, dust and daily use. These areas often need cleaning that considers both presentation and access, especially where customers, residents or staff continue using the property.
Dirty entrances, paths, driveways and customer-facing exterior areas can make an otherwise well-maintained property look neglected. High-pressure cleaning can improve the appearance of suitable surfaces before inspections, maintenance work, property presentation or as part of routine exterior care.
.
The same type of buildup can require a different approach on concrete, pavers, brick, render or painted surfaces. Age, wear, coatings, joints and previous damage can all affect how the area should be cleaned. We assess these factors before choosing the pressure level, equipment or treatment for the job.
This distinction matters: more pressure does not always mean a better clean. Matching the right treatment to the right contaminant often makes more difference than pressure strength alone, and it’s a key reason results can vary between providers using the same equipment.
Whether you call it pressure cleaning, pressure washing or power washing, we provide both high-pressure cleaning and soft washing across Sydney. We choose the method for each surface instead of running one setting across the whole job.
High-pressure cleaning is our method for durable surfaces like concrete driveways, paths, car parks and hardstands, where it removes dirt, tyre marks, oil residue and algae. Where high pressure could do damage, such as render, painted walls and ageing finishes, we use soft washing: lower pressure with a cleaning treatment.
| Your property | Method we use | What you get |
|---|---|---|
| Driveways, paths, car parks, hardstands | High-pressure cleaning | Tyre marks, grime and algae lifted from durable surfaces |
| Concrete and pavers | Controlled high-pressure cleaning | A cleaner surface, with pressure adjusted to protect joints and worn areas |
| Render, painted walls, building exteriors | Soft washing | Algae, mould and grime removed without the risks of high pressure |
| Mixed surfaces | Both, assessed area by area | Each surface cleaned with the method that suits it |
Not sure which method your property needs? Send photos with your quote request, and we’ll recommend the right approach and price it in your quote. Get a quote or see our soft washing service.
We provide high-pressure cleaning and pressure washing for a wide range of Sydney properties. The scope, access requirements and cleaning method can differ between a private home, a strata complex, a commercial site and an industrial property, so each job is planned around how the site is used.
Residential pressure cleaning and house pressure washing can include driveways, paths, courtyards, pavers, decks, patios and building exteriors, removing tyre marks, algae and built-up grime. We clean for homeowners, landlords and property managers, and check the surface material and its condition before choosing the method, using soft washing on delicate finishes to avoid damage. See our residential pressure cleaning service.
Â
 Strata pressure cleaning and apartment pressure washing can include shared entrances, pathways, external common areas, driveways, visitor and basement car parks and other agreed common property. We clean for strata managers, body corporates and owners corporations, and plan access around residents, vehicles and shared spaces so the work can be completed with minimal disruption. See our apartment pressure cleaning service
Commercial sites need cleaning that works around customers, staff and normal operating hours. We provide commercial high-pressure cleaning and pressure washing for entrances, walkways, forecourts, loading areas, car parks and other agreed hard exterior areas, with the schedule planned around how your business operates including after-hours or staged work where required. Learn more about our commercial pressure cleaning.
Industrial properties can include hardstands, loading areas, access zones and other durable exterior surfaces exposed to regular vehicle or operational use. These jobs often need more detailed access planning, larger work areas and coordination around site activity. We also clean petrol station forecourts, fixed plant areas, workshop washdown areas, and mobile plant and equipment washdowns. See our industrial pressure cleaning service for more information.
We provide pressure cleaning for council and public-space sites such as footpaths, plazas, car parks and shared amenities, as well as large managed sites with several areas. These jobs are planned around public access, drainage and agreed work hours, and are scoped after a site assessment before the quote is confirmed.
We provide pressure cleaning for high-rise and multi-storey building exteriors, including facades, podiums and other external surfaces. Cleaning above ground level needs extra planning for access, safety documentation and surface protection, so each job is scoped around the building and the work area. Send us the building height, surface type and access details and we’ll scope the work.
Pressure cleaning results depend on more than the equipment being used. Surface condition, pressure selection, access, surrounding areas and site activity all affect how the work should be planned. Westlink Cleaning Services assesses these factors before starting so the cleaning approach suits the property and the surfaces involved.
Westlink Cleaning Services carries $20 million in public liability insurance, providing added protection when pressure cleaning residential, strata, commercial and industrial properties across Sydney.
Concrete, pavers, render, painted finishes and other exterior materials do not respond to pressure in the same way. We assess the surface and its condition before selecting the pressure level, equipment and treatment required for the job.
If an area covered by the agreed cleaning scope does not meet our service standard, contact us within 72 hours. We will review the concern and, where it relates to the completed pressure cleaning work, return to re-clean the affected area.
Where included in the service, before-and-after photos can document the condition of the surface and the completed work. Larger or managed properties can also include checks against the agreed cleaning scope before the job is closed.
Need pressure cleaning for a Sydney property? Tell us what needs cleaning, send photos where available, and we can assess the job and provide a clear quote for the required scope.
 Pressure cleaning across Sydney often involves more than choosing the right cleaning method. Access, vehicle movement and shared spaces can all affect how a job needs to be planned. We review these site conditions before work begins so the cleaning can be completed safely and with less disruption to the property.Â
Gates, narrow access points, shared driveways, basement entries and restricted areas can affect where equipment can be positioned and how hoses are run through the property. We check access in advance, especially on strata, commercial and larger sites where service areas may not be directly accessible from the street.
Driveways, car parks, loading areas and busy entrances may need to remain partly accessible during cleaning. Where vehicles, residents, customers or staff are moving through the site, we plan the work area and timing around normal property use. This is particularly important for shared walkways, building entrances and other high-traffic areas.
Strata and commercial properties often remain occupied while exterior cleaning is carried out. Access may need to be coordinated around residents, tenants, customers, staff or other contractors. Residential jobs can usually be arranged around a booked appointment, while larger managed properties may require staged cleaning or scheduled access to different areas.
Many Sydney properties include more than one exterior material. A single site may combine concrete paths, pavers, rendered walls and painted surfaces. These materials do not always suit the same cleaning approach, so we assess each area separately and adjust the method where needed rather than treating the whole property as one surface.
Different exterior surfaces need different levels of pressure cleaning, treatment and care. We assess the material, condition and type of buildup before deciding how each area should be cleaned.
Driveways can collect tyre marks, vehicle residue, dirt, algae and other outdoor buildup. Concrete and paved driveways do not always respond the same way, so we adjust the method to suit the surface and its condition. Learn more about our driveway pressure cleaning service.
Concrete paths, slabs, entrances and other hard exterior areas can usually handle controlled pressure cleaning when the surface is in suitable condition. We assess age, wear, cracks and contamination before cleaning. Explore our concrete pressure cleaning service.
Paved areas often collect dirt and organic growth across the surface and between joints. Cleaning needs to account for the paver material, joint stability and installation condition so unnecessary disturbance is avoided. See our paver pressure cleaning service.
We clean suitable paths, courtyards, entry areas and other pedestrian surfaces across residential, strata and commercial properties. These areas can develop grime, algae and general buildup from regular use and outdoor exposure. The cleaning method is selected according to the surface rather than the location alone.
Exterior building pressure cleaning covers walls and facades in render, painted finishes, masonry and other materials that may not suit strong pressure. We assess the surface first and use controlled high pressure or a lower-pressure method where needed. More sensitive surfaces are usually better suited to soft washing.
Car parks, ramps and vehicle-access areas can develop tyre marks, traffic film and general surface grime. Cleaning is planned around the surface, access, drainage and vehicle movement across the site. Learn more about our car park pressure cleaning service. This includes basement and multi-level car parks, ramps and, where we service them, petrol station forecourts
Some decks can be cleaned using carefully controlled pressure, while others need a gentler approach because of the timber, coating or existing surface condition. We assess the deck before choosing the method. Explore our deck pressure cleaning service.
Pressure cleaning prices in Sydney depend on the area being cleaned, the surface, contamination, access and treatment requirements. Rather than applying one fixed rate to every property, we price the work around the actual scope of the job. As a general market guide, a Sydney driveway pressure clean can commonly fall around $200–$450, depending on the driveway size, surface condition, staining and access. This is an estimated market range, not a fixed Westlink Cleaning Service price. Strata, commercial and industrial properties vary more widely because the total area, access arrangements and site requirements can differ considerably. For many residential jobs, clear photos can help us assess the surface, approximate size and level of buildup before preparing a quote. Larger or more complex properties may require a site assessment.
Your quote can be affected by:
For a more detailed breakdown of typical rates by surface and property type, see our Pressure Cleaning Cost Guide.
Affordable pressure cleaning isn’t about the lowest number on a quote. It’s about paying for the right method on the right surface so the job doesn’t need redoing. A few things help keep the cost sensible:
Include every area you need cleaned in the same quote, so access and setup are covered in one visit.
Send clear photos so we can scope the job without a site visit where possible.
Book routine cleaning for high-use areas so buildup doesn’t turn into heavy staining.
Tell us about parking, gates and shared access up front so no time is lost on the day.
Smaller residential jobs can usually be quoted from photos. Larger or more complex jobs are priced after a site assessment.
Pressure cleaning can be arranged as a one-off service or as part of a regular exterior maintenance plan, depending on how the property is used and how quickly buildup returns.
One-off cleaning suits properties with accumulated dirt, algae, grime or other exterior buildup that needs to be cleared in a single visit. It can also be useful before an event, property inspection, lease handover or when improving the presentation of a specific area such as a driveway, path, courtyard or entrance.
Regular cleaning can help keep high-use exterior areas presentable and reduce the amount of buildup that develops between services. This is often more practical for strata properties, commercial sites and shared areas that receive frequent vehicle or pedestrian traffic. Â
Our commercial pressure cleaning service can be scheduled around operating hours, customer access and the areas that need ongoing exterior maintenance.
Larger commercial, industrial and managed properties may need several exterior areas cleaned across the same site. We can plan the work around access, operating hours, vehicle movement and the priority of each area, with cleaning staged where required to reduce disruption. For sites with larger hardstand areas, loading zones or operational access requirements, our industrial pressure cleaning service can be planned around the way the property operates.
Need pressure cleaning before an inspection, event or handover? We can often book short-notice jobs within 2 to 3 business days, depending on availability, access and the size of the area. Send photos and your preferred date through the quote form and we’ll confirm what’s possible.
Booking pressure cleaning should be straightforward. We first confirm what needs to be cleaned, then work through access, timing and the scope before the job is scheduled.
Start with the property location, the areas you want cleaned and the main surfaces involved. This may include a driveway, paths, outdoor areas, common property, car parks or several exterior areas across the same site.
Clear photos are often enough to help us understand the surface condition, level of buildup and access. Larger, more complex or multi-area properties may need an on-site assessment before the scope is confirmed.
Once we understand the job, we confirm the areas included, any treatment or access requirements, and the quoted price. This helps make the scope clear before work is booked.
We confirm practical details such as gates, parking, vehicle movement, shared access and the preferred service time. For strata and commercial properties, this may also include planning around residents, customers, staff or normal operating hours.
The cleaning is carried out according to the confirmed scope, with the method adjusted to the surfaces and site conditions involved.
Once the work is complete, we review the agreed areas and confirm that the scheduled scope has been completed before the job is closed.
Pressure cleaning can involve wet surfaces, hoses, equipment, vehicle movement and people continuing to use the property. Before work starts, we consider how the cleaning area will be accessed and how the job can be carried out around the people and activities on site.
Entrances, walkways, car parks and shared areas may remain in use during cleaning. Where needed, the work is planned around pedestrian movement, vehicles and property access so cleaning equipment and hoses do not unnecessarily interfere with normal site use. Larger commercial and managed properties may require work to be completed in stages.
Equipment is positioned according to the available access and the area being cleaned. We also consider nearby doors, windows, plants, fixtures, vehicles and adjoining surfaces that may be affected by spray, loosened dirt or cleaning treatment.
Some work environments or scopes may involve additional safety documentation. Where a Safe Work Method Statement is required for high-risk construction work, the relevant hazards, risks and control measures need to be documented before that work begins.
Before cleaning, we consider drainage points and where wash water, dirt and loosened surface residue may travel. Runoff requirements can vary with the property, contamination and work area, so this needs to be considered as part of site planning rather than allowing wastewater to move uncontrolled through the property or surrounding areas.
For larger strata, commercial and industrial properties, these site considerations can be reviewed during the assessment so access, work areas and any additional requirements are understood before the service is scheduled.
Looking for pressure cleaning near you? Westlink Cleaning Services is based in Bankstown and services properties Sydney-wide, from the Northern Beaches to the Sutherland Shire and from the Eastern Suburbs to Western Sydney. Choose your area below to see the suburbs we cover. If you can’t see yours, send us your address and we’ll confirm.
Manly, Dee Why, Brookvale, Mona Vale, Avalon, Narrabeen, Collaroy, Freshwater, Newport
 Hornsby, Pymble, Turramurra, Wahroonga, Gordon, Killara, Lindfield
Westmead, Harris Park, Granville, Northmead, Rydalmere, Merrylands, Auburn
Sydney CBD, Surry Hills, Pyrmont, Ultimo, Redfern, Darlinghurst, Waterloo, Zetland
Bondi, Randwick, Coogee, Maroubra, Paddington, Woollahra, Double Bay, Rose Bay
Newtown, Marrickville, Leichhardt, Balmain, Burwood, Strathfield, Ashfield, Five Dock
(Western Sydney): Penrith, St Marys, Erskine Park, Mount Druitt, Blacktown, Emu Plains, Glenmore Park
Castle Hill, Baulkham Hills, Kellyville, Rouse Hill, Bella Vista, Norwest, Dural
Sutherland, Cronulla, Miranda, Caringbah, Menai, Engadine, Gymea
Hurstville, Kogarah, Rockdale, Bexley, Mortdale, Penshurst, Beverly Hills
Bankstown, Liverpool, Campbelltown, Fairfield, Cabramatta, Casula, Leppington
North Sydney, Chatswood, Mosman, Crows Nest, St Leonards, Lane Cove, Artarmon
Pressure cleaning costs in Sydney vary by the size of the area, surface type, condition, access and treatment required. As a general market guide, driveway pressure cleaning in Sydney can cost around $200–$450. Larger residential, strata, commercial or industrial jobs can vary considerably depending on the total cleaning area and site requirements. These figures are estimates rather than fixed Westlink prices, so we provide a quote based on the actual property and scope of work.
Yes. Clear photos can often help us understand the surface, approximate area, level of buildup and access conditions. For larger strata, commercial or industrial properties, an on-site assessment may still be needed before the final scope and quote are confirmed.
Yes. We’re based in Bankstown and service Sydney-wide, including the Northern Beaches, Inner West, Eastern Suburbs, North Shore, Western Sydney and the Sutherland Shire. We come to your property, so there’s nothing to bring to us. Check the service areas above or include your suburb in your quote request and we’ll confirm.
Pressure cleaning in Sydney typically costs around $3–$6 per square metre, while hourly rates can range from $70–$165, depending on the provider and job requirements. Standard driveway cleaning commonly costs $180–$420 per job. At Westlink Cleaning Services, we provide quotes based on the area, surface type, level of dirt or staining, and site access rather than relying on a single fixed rate. We confirm the total price before work begins, so you know what to expect.
Yes. For occupied strata and commercial properties, cleaning can be planned around residents, customers, staff, vehicle movement and operating hours. Larger jobs may be completed in stages where this helps maintain access.
Yes. Pressure cleaning can be booked as a one-off service or arranged as part of a regular exterior maintenance schedule. The right option depends on the property, traffic levels and how quickly exterior buildup returns.
It helps to provide the property location, areas you want cleaned, surface type if known, clear photos and any access details. For managed properties, information about parking, shared areas, operating hours or restricted access can also help us define the scope accurately.
Some do. Photos may be enough for straightforward work, but larger sites with multiple areas, restricted access, shared spaces or operational requirements may need an on-site assessment before the quote is finalised.
We review how residents, customers, staff and vehicles use the site, then plan the cleaning around those movements. This may involve adjusting the service time, working in stages or keeping selected access areas available while other sections are being cleaned.
Yes. A quote can include several areas such as driveways, paths, entrances, outdoor spaces, car parks or other suitable exterior surfaces. Including all required areas at the quoting stage helps us define the full scope before the job is booked.
Request a quote for high-pressure cleaning or pressure washing anywhere across Sydney. When submitting your request, include the following details.
Clear photos and access details can help us assess the job faster and prepare a more accurate quote.